#4008 The NEW Electropull Focus Electric Uncorking Machine w/ STAND

1. $1195.00

#4008 The New Electropull Focus Electric Uncorking Machine with Stand - This is a reduced sized version of the 4010 ELECTROPULL® (pictured above) This machine operates with one motor only. Some electrical elements have been placed in a compartment at the rear of the stand behind the upright post. The stand is an integral part of the ELECTROPULL® Focus. It has a unique 2.7 mm open spiral, hardened stainless steel worm. This worm has no difficulty with hard agglomerate or plastic corks. Machine will shut down if hard object (other than wine bottle) is placed in cradle. Re-start in 30 seconds. Entire unit stands 35-3/4” tall X 4 “ wide. Machine itself: 20-3/4” H, 3-1/2” wide, 4” deep. Weighted base measures 9” X 9”. Total weight of unit: 23 lbs. Pkg. Hurry, limited quantites!! $69 Extra weight ship charges apply. NOW IN STOCK & AVAILABLE! CLICK HERE for Electropull Focus Replacement Worm Kit ONLY $59.00

#5066 Dion Uncorking Machine - Nickel plated

#5065 Dion Uncorking Machine - Brass

#5065 SPECIAL Reg $279.00 NOW $219.95  #5066 -WAS $269.00 NOW $209.95 *Replacements Worm $28.99*

#5065 Dion Uncorking Machine - Brass #5066 Dion Uncorking Machine - Nickel - From Spain, one of the best counter - mounted uncorking machines in the business. Insert wine bottle into the cylinder, pull the wood lever and the worm automatically screws into the cork. Push the lever back and the cork is ejected. Redesigned to accept the newest flanged bottles too. SPECIAL #4082 TABLE STAND (Will fit any bench mount) WAS $34.99 NOW $29.99

#5061 Zeus Uncorking Machine - Nickel

#5060 Zeus Uncorking Machine - Brass

	#5061 WAS $259.00 NOW $209.95  #5060 WAS $269.00 NOW $219.95 *Replacement Worm $28.99*
	Zeus Wall Mounted Uncorking Machines - This sturdy machine is made for high volume use. It attaches to the studs in your wall for a strong anchor. Features a three - position arm selector for cork extraction. Overall height with arm up 22" 30 lbs.

#4021 Cedon Uncorking Machine - Nickel

#4020 Cedon Uncorking Machine - Brass

#4021 BRASS PLATED WAS $425.00 NOW $359.95 20% OFF!! SPECIAL #4020 NICKEL- WAS $385.00 NOW $299.95 20% OFF!!  #4022 Replacement Worm for Cedon  1. $38.99 Cedon Uncorking Machine - This is the premier tube type uncorking machine made for the foodservice industry. This one will last! Operation is simple and efficient. Bench mounted with vise clamp and wing nut. 12" overall Redesigned to accept flange bottles. SPECIAL #4082 TABLE STAND (Will fit any bench mount) WAS $34.99 NOW $29.99 Still too much? We also carry rebuilt ones too. Go to our salvage pages.

#4025 Cyklops Uncorking Machine - Nickel plated

Reg. $489.00 Special Price $399.95 *All replacements Parts Available*

#4025 Cyklop Uncorking Machine Nickel plated - Top-of-the-line model that's made for the most demanding eonophile. Only a few left in inventory. With one motion of the lever, this model inserts into the cork and extracts it from the bottle. Returning the lever arm to the upright position ejects the cork off the spiral. Comes with vice clamp and wing nut for counter mounting. Also has a side mounted 2-wheel foil cutter built in. 8" lever arm, 11" height, 7" deep, 40 lbs. Cyclops Worm $42.99

#4090 Grandstand Uncorking Machine - 6 piece Set

Reg. $49.95 Special Price $42.95 *Replacements Parts Available*

This all-in-one single lever type-uncorking machine is mounted on a rubberized surface stand with an adjustable up and down vertical shaft. The shaft can be locked into place to direct the machine itself to locate directly over the bottle top. Easily portable (weighs 2 lbs, 9 oz.). A suction cup base holds the stand steady on a hard, flat surface activated by pushing a lever at the base to the user’s full right position. Stored and imbedded on the backside of the stand are four small tools. They are two bottle stoppers, a drip collar and a foil cutter. Stands 19” tall in full upright position; 16-1/4” total height in the lowest position. Base 5-1/4” dia.

#4085 Le Grape Uncorking Machine - Brass W/ Stand

#4085 WAS $149.00 NOW $119.99 SPECIAL #4082 HEAVY DUTY TABLE STAND (Will fit any bench mount) WAS $34.99 NOW $29.99  #4081 Replacement Worm for Le Grape  1. $20.99 Le Grape Uncorking Machine - Here is a great attractive hand-finished antique replica uncorking machine with an antique brass finish with a grape cluster design. Operation is simple and efficient. The squeezable clamps hold the bottle in place and with ONE downward stroke, the cork is removed. Bench mounted with vise clamp and wing nut. 8-1/2" overall . SPECIAL Le Grape Uncorking Machine WITH Table Stand $119.99 BECAUSE OF WEIGHT EXTRA $5 SHIP CHARGE APPLIES.

#5510 Bar-Pull Counter Mount Uncorking Machine - Brass Plated

#5511 Bar-Pull Counter Mount Uncorking Machine - Chrome Plated

#5510 BRASS WAS $85.00 NOW $67.00 21% OFF!! SPECIAL #5511 CHROME - WAS $85.00 NOW $67.00 21% OFF!!  #5500 Replacement Worm for Bar-Pull  1. $17.99 Bar-Pull Uncorking Machines - This is the consumer oriented tube type uncorking machine made for the home. Choice of counter mount: Brass or chrome plated.. Bench mounted with vise clamp and wing nut. 21" overall Will accept flange bottles.Because of weight $5 extra ship charge applies.6 Month Warranty for home use. 4082 Heavy Duty TABLE STAND (Will fit any bench mount) WAS $34.99 NOW $29.99

#5510 Bar-Pull Wall Mount Uncorking Machine - Brass Plated

#5511 Bar-Pull Wall Mount Uncorking Machine - Chrome Plated

#5515 BRASS WAS $85.00 NOW $67.00 21%OFF!! SPECIAL #5516 CHROME - WAS $85.00 NOW $67.00 21% OFF!!  #5500 Replacement Worm for Bar-Pull  1. $16.99 Bar-Pull Uncorking Machines - This is the consumer oriented tube type uncorking machine made for the home. Choice of wall mount. Brass or chrome plated.. 21" overall Will accept flange bottles.Because of weight $5 extra ship charge applies. 6 Month Warranty for home use.

LOOKING FOR EVEN BETTER PRICING??
CONSIDER PURCHASING A REBUILT MACHINE